We will replace the bad components on the current PCB (printed circuit
board) or replace the whole PCB. Then transfer the original factory ROM BIOS
chip from the old PCB and plug it in or solder it onto the new replacement
PCB. Your drive cannot run without the Original Factory-ROM
BIOS chip
from the OLD BOARD!!! Every ROM BIOS chip is configured to
compensate for that particular drive's read/write heads microscopic mis-alignments,
which every drive has. The HDD and the ROM BIOS chip are ONE.
HDD spins up, then down, then up again constantly.
Possible Diagnosis:
Faulty head ampifier
Solution:
DO NOT toss the Factory-ROM BIOS chip that sits on the OLD BOARD, or your drive will not run!

DO NOT LOOSE THIS CHIP!!!
Cost of Labor:
PCB Repair Only |
|||
$100 + parts ($25 ~ $100) | |||
![]() |
![]() |
![]() |
If we are satisfied with the amplifier repair/replacement, you won't need data recovery. |
Data recovery via PCB repair/replacement |
|||
$300 + parts ($0 ~ $100) | |||
![]() |
![]() |
![]() |
![]() |